The Ultimate Glossary Of Terms About Window Handles

upvc window handle won't close properly Window Handles Replacement

It is fairly easy to replace your window handle. You'll only require a few tools and a few steps. The key to an effective replacement is to determine the handle type and measuring the spindle length.

There are two kinds of handles made from upvc: Cockspur and Espag handles. Espag handles have a square 7mm spindle that engages with the locking mechanism that is fitted to the frame.

Espag handles

Espag handles are one of the most sought-after types of window handle available for upvc windows and some timber frames as well. They are designed to work with multipoint locking systems that use espagnolette. The handle features a 7mm square shaft which protrudes out of the back and is then placed into the gearbox for a multipoint locking system within the window. They are available in a variety of spindle sizes. This is because every type of window handle is connected to a different multipoint locking system with a distinct arrangement and position of the gearbox.

The standard specifications for an espag window handle include a button to secure the window in the closed position. They also have keys locking features and, if required the fire escape non-locking feature. Some even reach Secure by Design standards, which will give you added security. They are usually attached to the sash with two screws that are 43mm apart.

There are a few variations to the espag window handle particularly the in-line versus Cranked design. Those that are in-line will turn both left and right while those that are cranked are only functional in the direction of the window's movement (i.e. They can be installed either clockwise or counter-clockwise. They can be fixed to the window either way, but it is essential that they are pointed in the same direction as the old cockspur handle pointed.

The most important thing to keep in mind when selecting a replacement window handles upvc window handle is to make sure you take a measurement of the length of the spindle. The spindle is a metal bar that protrudes from back of the door handle. It can be any length from 10mm to 55mm. The length is what is visible when the handle is in its original unbroken condition. It is important to measure this when buying an entirely new handle because the spindle drives the lock within the window.

Certain manufacturers offer a magnetic espag handles that eliminate the requirement to cut spindles to size. This may make it easier to fit the process since it is quicker and simpler to remove a replacement and insert another. However, it is recommended to take the time to determine the length of the spindle as this will ensure a smooth operation of the handle.

Cockspur handles

Cockspur handles are found on older uPVC or aluminium windows. They do not have a locking mechanism, but they are considered safe as the handle's nose is closed into a wedge-shaped piece that is fitted to the frame of the window. (This type of handle is not to be confused with timber frames that come with a catch). Cockspur handles are still very popular and there is a variety of options to match the types of doors.

They are an easy and affordable option and can be key-locked to meet the requirements of home insurance. There's also a selection of handle nose sizes to match different frames. A lockable version is also available which adds an extra level of security to the window. It has been approved by Secured by Design.

These types of handles are attached to the sash of the casement or tilt turn window handles and turn windows using a spindle that passes through the baseplate of the handle. The handle is operated with the lever on either side, and the spindle of the handle is engaged by a wedge for striking that is attached to the frame of the window. Cockspur handle kits are usually offered with right and left hand versions, and there is a wide selection of nose heights to fit the majority of frames.

The key to the successful installation of cockspur handles is getting the correct wedge block size. It is a small piece of plastic that is in the shape of a ramp. You can replace with a newer one slightly larger to ensure that the handle is properly closed across the gap to prevent the draughts. The fixing positions of these handles are standard and usually range between 38mm and 58mm in size. You should be able find the correct replacement without much trouble.

When you are choosing a handles for cockspurs, you must also consider the spindle's length. This is the length of the baseplate of the handle up to the point at which the shaft of the handle extends through the sash and into the frame and it is crucial that this measurement is accurate to ensure the handles function smoothly.

Tilt and turn handles

These handles are specifically designed for tilt-and-turn windows and come in nonlocking, locking, or tilt safe options. These heavy-duty handles have an extremely firm grip, and detents are located at 90 degrees. They are available in a choice of finishes that include black, white and chrome, as well as brushed satin. Fits Timber or PVCu tilt-and-turn windows.

These handles can be used to replace the handles on older windows that aren't fitted with locks. However, you should be aware that these are different from espag handles made of upvc as they aren't locked and work in a different way.

They have an 'turn before tilt' mechanism that allows the window to be opened inwards and then dropped down into a ventilation or hopper style position to let fresh air in. This kind of handle also referred to as DK or dry keep window handle, is commonly employed in older double glazing window handle repair glazed properties.

There are many things to keep in mind when replacing a tilt and turn window handle. You must first ensure that the handle you choose is compatible with your windows. This includes examining the size of the spindle. The length of the spindle is the length of the metal rod that extends from the handle into the locking mechanism. The longer the spindle is, the more security it will provide.

The handle is typically attached to the frame or base of your window by using a screw placed either above or below it, depending on the design of the window. The screws can be removed by using a screwdriver, and then the handle can be removed. It is best to open the handle first to make it easier to access both screw holes.

After the handle is removed, you should be able observe two screws that need to be removed which will then reveal some screw caps with decorative designs. The handles can be removed by removing them with the flat-head screwdriver. The screw cap can be replaced once the handles are back in their original position on your windows.

Measure the spindle length

The spindle of a window handle decides the way it will open and close. Different types of handles have varying spindle lengths. It's essential to measure the length of your previous handle prior to purchasing a new. This will ensure that your new handle will fit in the window in the right way and is easy to open and close.

If you're looking to replace your handles or simply improve the appearance of your uPVC window the design of the handle will have a significant effect on the way the window opens and locks. There are a variety of handles, such as inline espagnolette, cranked and key locking. There are tilt-turn handles designed to be used with tilt-turn uPVC window that can be opened both ways.

To replace a window handle look for the screw caps holding it in the position. They are either above or below the window handle and can be removed with a screwdriver. Once the screws are removed, you can take the handle off the window frame.

The handle can be removed from the window frame and replaced with a brand new one. Make sure that the new handle is placed the same way as the old one was and that the spindle is aligned with the lock mechanism. Once the new handle is in place, it's time to put the screws back in and secure the handle. You can then place the caps on the screws when they're missing.

If your uPVC windows handles break it is possible to replace them. The handle can break due to a powerful force or the female portion that holds the spindle has worn out. This could happen if a person in your home attempts to force the handle while it is locked.

The most effective way to replace your window handle made of uPVC is to purchase a high quality one that will last for an extended period of time. This will save you money in the long run. In addition, it will give your house an appealing and modern look.