In Wall Fireplace 101 The Ultimate Guide For Beginners
In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace
A fireplace built into the wall provides a sleek, polished look without the need to purchase a mantle. It is one of the easiest electric fireplaces to install.
There are a few aspects to think about prior to purchasing an in-wall fireplace. To maximize the value of your investment, consider these helpful tips:.
Height
It might seem like an easy question however, determining the height of your fireplace is one of the most important decisions you'll make. The height of your fireplace can influence everything from how it will fit into a space to its visibility. Your fireplace could look strange if it is raised too high. It could also take away from its attractiveness. A fireplace that is too low can be lost within the wall space.
Luckily electric fireplaces are able enough to be placed at various heights. The majority of people install their fireplaces sitting at eye level. This requires a height of 40-42 inches. Some fireplaces are mounted under their TVs, which can be visually appealing.
The exact height of your fireplace will be determined by certain factors, such as the dimensions of the room as well as the length of the wall where you want to mount it. The larger a room is larger, the more spacious it can be and it could mean that you are able to fit an even larger fireplace. The length of a wall is also important, as a longer wall will support a larger fireplace.
Another important factor to consider is how you plan to use your fireplace. If you intend to use it to decorate your home, the lower height is ideal. If you plan to use it to heat your home it is necessary to ensure that the fireplace is strong and tall enough to withstand the safety standards.
It is essential to choose the right height for Ethanol fireplaces your fireplace so that it will match your decor and be simple to clean or fill. It is always a good idea to ask an expert fireplace installer to assist you if are unsure about the size you should pick. They'll be able determine the best height for your fireplace based on their experience and the specifics of your home.
Depth
A fireplace's depth is important to consider if you intend to put it in a recessed place. If you're planning to cut through your wall, make sure that you have enough depth to accommodate the design of your fireplace (the smoke shelf that is above the fireplace, the flue that runs through the roof, and the fireplace itself). Also, think about the space you'll need for the surround and whether or not you want a mantle.
A lot of the latest electric models of fireplaces have an interior depth that is almost concealed, creating the appearance of a "built-in" look. The Panorama BI-Deep series is an excellent illustration of this kind of wall-mounted electric fireplace. The model has an 5.8-inch depth that allows the viewer to see the flames and ember bed, not the frame of the fireplace suite. It also comes with a choice of media options, including natural-looking driftwood logs White fireplace; https://coding.activcount.info/Fireplacesandstove0869, pebbles, crystals made of clear glass that reflect the flames and improve the ember bed.
Wall-mounted gas fireplaces are also available in shallow and deep versions. When determining the depth of your fireplace it is important to remember that these units are supplemental heating sources and must be properly vented by a skilled professional. When determining the size of a gas fireplace, you need to consider the length of the vent pipe and the size of the chimney.
Whether you choose a surface mount or one-piece installation, it's essential to follow the manufacturer's instructions carefully when installing your fireplace. A professional installer is recommended in most cases. It is also recommended to have an additional person on hand when installing gas fireplaces.
The addition of a fireplace in the wall space to your home is an excellent way to add value to it and create ambience. It can also lower your heating expenses. It's also a great alternative when you aren't able to fit an old-fashioned fireplace into your home due to space limitations or because of the location of the chimney.
Surface Mount
If you're unable or prefer not to cut through your wall or build out the space needed to install an electric fireplace A surface mount can give you an elegant and integrated appearance. Some models, such as the Allusion line, can be installed partially recessing in a wall without compromising aesthetics or heat output.
To begin the installation, mark the wall with a pencil where the bracket is to be mounted. Use a stud-finder for locating the studs and place each bracket in front at least one stud to ensure stability. If a stud can't be reached or isn't suitable for your fireplace, you could use drywall anchors as a support.
Once you've marked the location of the brackets for mounting and drilled them, screw them into the wall, ensuring they are properly aligned with the studs. If you can, secure each bracket to a stud to ensure strength and stability, however you could also use plastic anchors if necessary. After the mounting brackets have been installed then lift the fireplace up and hang it from the bracket. After it's secured, you can check the position of your fireplace to make sure that it's level and not crooked in the opening.
Before you begin the installation make sure to plug in your fireplace and make sure that all features work correctly. Then, light the fire, experiment with the heating, the ember bed lights and so on. Once you are satisfied with the results it is time to put in the floating mantel.
Depending on the model of your fireplace, you'll either require a wire connection to the appliance wire connector at the mantel's bottom or, if your fireplace has hooks or slots on the back, connect them to the slots on the wall mounting brackets. After you've completed this process make sure to consult the user manual for directions on how to remove the front glass panel from the opening and replace it.
If you want to adjust the height, replace the glass front after you have removed the front panel. If your fireplace includes ember bed media, spread it across the top grate to give it a more natural look. Secure it using the included screws.
Plug-In
These electric fireplaces do not require vents or chimneys like traditional wood-burning ones. They're plugged into standard outlets that can provide supplemental heating for rooms that are up 400 square feet. They also come with a variety of heating and flame settings, to allow you to customize the ambience. Some models have LED lighting effects that emphasize the flame and embers. Some models have an upper grille that conceals the manual controls, but it can be opened easily to reveal pushbuttons.
Electric fire places with plug-ins can be mounted directly on the wall or recessed to create an appearance of a built-in. These units are typically easier to set up than mantel fireplaces. Some models have a pedestal that permit you to place the fireplace on flat surfaces like a buffet or dresser. Included are the remote control, mounting hardware and log set. Depending on the model, these electric fireplaces could include flame and heat options that can be turned off for all-year-round comfort.
Certain models come with adjustable privacy glass that you can instantly change from completely see-through to partially transparent. This feature makes these models popular for walls that separate common spaces for entertainment, such as dining and living areas. These models are ideal in bedrooms, where adding a fireplace is a cost-effective option to warm up a room and ensure privacy.
While plug-in electric fireplaces don't require hardwiring as built-in models, they must be mounted within the wall that is at the very least free of studs and able to support the weight of the fireplace. Certain models come with a kit which includes an already wired cord and specially designed bracket to make the installation process simpler. This kit is available for either concrete or drywall installation.
If you opt to install your wall-mounted electric fireplace ensure that it is close to an outlet. Depending on the model that you choose, plug-in electric fireplaces may be connected to outlets that are on the same circuit or a separate circuit for your electric fireplace stove. It is recommended to have a separate circuit, so that all other appliances in your home can be powered by the same voltage. This could trigger your breakers.
