10 Inspiring Images About Electric Heater
How to Select Electric Heaters
electric effect wood burners heaters have a number of advantages they offer, including low initial costs, little maintenance required by the homeowner and efficient heating. They are also more convenient than heating systems that require venting.
They are especially beneficial when your electricity provider offers Economy 7 as the lower off-peak rate will reduce the cost of heating.
Temperature Settings
Ideally the electric heater should enable you to set the exact temperature you like, then maintain that temperature without having to switch it off and on. This will help save energy and stop you from entering or leaving an area that is too cold. Find a thermostat that has the ability to set a timer, should it be available.
When you are choosing an electric heater, make sure it is rated for the space in which you live. If the heater is too small will have to run longer to reach the temperature you want. This wastes energy and could cause your space to overheat. Utilize our calculator to determine the ideal heater's watts per square foot for your area.
Also, be sure the temperature control knobs are easy to access and adjust. If the knobs are recessed, you may need to remove screws and peel back insulation to access them, which can be a challenge. Be sure to check the recommended temperature range as well for safety and effectiveness. Temperatures below 120 degrees could trigger bacteria growth and increase the risk of scalding while temperatures that exceed 140 degrees could pose dangerous for fire.
The Everhot is a sleek compact heater designed for use in conservatories, or as the company describes it: "annexes, holiday cottages, narrow boats and shepherds' huts, as well as glamping pods." It can reach temperatures of up to 200C and is an ideal heater for heating as well as cooking. It comes with a timer as well as an ECO mode, which optimizes power and heat settings to be more energy-efficient.
It's also quiet and silent, with no fan sound and no whirring noise when you change settings. This makes it an excellent choice for bedrooms or living rooms. It comes with additional features like an integrated nightlight that lights up in a blue color when the heater is turned on, and a built-in humidifier that can be adjusted to create intermittent mist to create a more subtle effect. It's also durable and safe, with a tip over shutoff switch as well as an overheating safety feature that will shut off the unit automatically if it overheats. It is also UL-listed to ensure safety.
Safety
When using electric heaters, it is essential to take the necessary safety precautions. The dangers of fire from heaters and carbon monoxide (CO) poisoning are particularly dangerous for children, the elderly and those with chronic health issues or immune system disorders. In addition, children and pets could knock over a heater, leading to injury or death.
ESFI suggests that you inspect the heater's plug and cord regularly. Check for signs of damage like a cracked plug, a loose cord, or if a plug is cracked or loose. If the outlet or cord is hot, take it off and consult a certified electrician to repair it. Don't plug in multiple electrical devices at the same outlet using a space heater; it could cause overload and result in overheating.
It's a good idea to choose heaters that have been approved or identified by a nationally-recognized test laboratory, like UL. These products are more likely to meet the safety standards of voluntary manufacturers. Also, never put a heater in fire-prone surfaces like rugs and textiles. Maintain a minimum of three feet space between the heater and any combustible materials. Also, never put heaters in the bathroom or in the kitchen. Do not touch it if you are wet.
Also, make sure to connect a heater directly to a wall outlet. Never use a power strip. If you need to connect an extension cord, select the most compact one constructed with 14 gauge wire. Examine any outlets that are sagging, because this could be a sign of an overloaded circuit.
If you're using an electric space heater in an open space ensure that you keep it at least six inches from anything that may ignite. Place the heater on an unburnable, flat surface, not on cabinets, furniture or tables, which could overheat. Lastly, be sure to turn off the heater and disconnect it when you leave the room or retire to bed; leaving it on increases your risk of catching fire.
Electric heaters are a fantastic method to cut down on energy consumption and reduce the risk of injuries. As temperatures drop, facility managers frequently use real looking electric log burners heaters to add warmth in office spaces and common areas. Preferred Climate Solutions can install and maintain outdoor or indoor electric heaters to ensure that your workplace is as comfortable as is possible in the cold winter months. Contact us today to learn more about heating solutions.
Energy Efficiency
Consider the energy efficiency of a portable heater when making your choice. This is the amount of energy required to generate the desired output. Heating systems that consume less energy are more efficient and reduce the cost of heating your home or business.
The majority of electrical heaters convert electrical energy into heat using an element for heating. This is typically made up of a coil, ribbon, flexible heater element, or tubular element that emits heat when an electric current passes through it. The amount of heat that is produced is contingent on the heating element employed and the method used by which it transmits heat (convection or radiation).
If you are concerned about environmental impacts, you should consider models that use an environmentally friendly method of energy. It could be a renewable energy source or alternative to fossil-fuels such as solar or wind.
The energy efficiency of electric heaters is also affected by where and how the electricity is generated. Electricity derived from solar or wind power sources is more efficient than electricity derived from fossil fuels in a power station.
Aside from choosing a heater that uses an environmentally friendly form of energy, you should also select one that has various built-in energy saving features. These may include automatic shutoff mechanisms that are activated in the event of overheating or if a heater is accidentally tipping.
These security measures will help protect your family members or employees, and can also help you save money on energy bills by preventing excessive use. Many portable electric heaters operate quietly, making them ideal for offices, bedrooms and other places that require a quiet atmosphere.
Another way in which electric stoves fireplace heaters will save you money is by decreasing the number of maintenance calls you will need to make. Gas units are more costly to repair than electric models and maintenance costs could increase over time. Electric models are generally cheaper to maintain, and often come with more advanced features that aid in reducing energy consumption.
Installation
Electric heaters use the Joule principle, which converts electrical power into radiant warmth that warms a room. They're also extremely efficient and economical compared to other types of heating, especially gas. However, these units aren't suitable for every home and could put stress on an existing electricity system. For this reason, it's best to have an electrician professional check if the current system can handle the extra demand of an electric log burning stove wall heater prior to installing one.
When selecting an electric heater, you must consider a variety of aspects, including the size and type of the heater, as well as the space in the space it will be placed. The type of heater you select will determine the price to run it. Electric baseboard heaters are more expensive to run than space heaters or portable heaters, but they offer an even heat and don't require vents or chimneys.
Electric fan heaters include an air blower that circulates hot air throughout the room. This kind of heater is usually most economical to run, however it can be noisy and take longer to warm a room than other types of electric heaters.
Find a heater that comes with a thermostat. This feature allows you to set a temperature target and the heater will turn off automatically when it reaches the desired temperature. This feature will reduce the energy use and also help you avoid having to keep turning the heater on and of.
Make sure to shut off the power source at the breaker box, and use a circuit tester to verify that it's off before you begin installing an electric heater. Mark the area on the wall where you intend to mount the heater and then cut a hole in the wall. Use a drywall saw to cut the required section, making sure not to cut any electrical pipes or wires.
Use a cable 14/2 of the same length and gauge as the existing wires, from the breaker panel up to the wall opening. Strip approximately 1 inch of insulation from the conductors' ends on each wire and connect them to an available screw in the outlet box. Label or mark the wire with red tape to identify it as the "line". Connect it to the wire leads inside the thermostat box marked "load".
