10 Healthy Habits To Use Kia Picanto Key Fob Replacement

How to Replace a kia sportage key replacement Sportage replacement key kia Key

The key on many Kia models comes with the keyless entry feature built in. The key functions like an remote control, and is exchangeable by an Kia dealer.

Key fobs can fail to function due to a number of reasons, such as the battery being dead, worn-out buttons signal interference, or water damage. Here are some tips to assist you in getting your Kia sportage replacement key to work again.

How to replace a remote key or smartkey

No matter if your kia picanto replacement Key comes with an intelligent key, remote key push to start key, or regular metal non-transponder key, the battery in these keys will eventually need replacement. This is especially relevant if your vehicle displays a message that indicates that the smart key or remote has low battery power.

Luckily, it's an easy process. To replace the keyfob battery take out your mechanical key from the slit at the back of the fob. Then, pull the cover open. Inside the key fob will be a small screw that holds the battery in place. Take out the old battery by unscrewing the screw using a small screwdriver. Install the new battery and then close the cut on the key fob.

When the key fob is equipped with an updated battery and you've tested it, press the locks and unlock buttons. It's good when the doors lock or unlock as expected. You can now utilize the hands-free feature to lock and unlock your Kia whenever your fingers feel cold or when you need to complete errands in Brandon.

Note: Certain key fobs (transponder chip or smart keys) might require their programming completed. This requires a specific programming machine that only the dealer or automotive locksmith has access to. Other keys (non transponder keys made of metal) do not require programming. If your key has to be reprogrammed, then you must know the key code number that is stamped on the tag of the key code and then record it in a safe location.

How do you replace the battery?

If the Kia key fob is unable to respond when you press the lock/unlock button, it's a sign that the battery is not fully charged. A low battery can also cause other issues, like the check engine light turning on or the engine not cranking properly. Fortunately, replacing the key fob battery is a relatively simple DIY project that requires only the most basic tools.

Before you begin the process ensure that your vehicle is turned off and all doors are shut. Locate the small plastic piece on the bottom of your key fob, and gently jiggle it until the metal key pops out. The key can be inserted into the driver door handle to unlock your car.

To replace the key fob battery, take off the cover at the rear and use a plastic pry bar tool to remove the latch holding the black negative battery cable. Remove the old battery and orient the new battery in a way that the "+" positive side faces you, while the "-" negative side is facing towards the fob's electronic contacts. Push the new CR2032 battery straight into position without putting too much force on it to avoid damaging or breaking the contacts made of metal.

After installing the new battery and turning the key fob off and on in the ignition until the door locks cycle. You can then test your Kia's key fob to ensure it's working as intended.

How can you replace the smart key

There is a possibility of having an ordinary keyfob or Smart Key based on the model of Kia Sportage. The smart key comes with an embedded mechanical key blade while the standard key fob does not. Both types of key fobs are equipped with an internal battery that will eventually need to be replaced. This is a straightforward process that takes only two minutes.

Before you begin, you will want to ensure that you're on a flat surface with good lighting and that the Kia is off. Keep in mind that there are tiny pieces inside the fob which could fall out if you are not vigilant.

The small release button is located on the lower backside. It could be a circular or rectangular slot. When you press it button, the mechanical blade will pop out and you can then open the key fob.

Once you have the key fob opened, you can simply take out the old battery and replace it. The new battery is a C2032, and can be purchased from a local or online auto parts shop. After you're done, your key fob should permit you to lock the vehicle, unlock it, and then start your vehicle even if it's not running.

How to replace the mechanical key?

The kia sportage key replacement key fob is a great convenience that lets us lock and unlock our car with the click of an button. But like any device it may have issues occasionally. There are ways to fix these issues and ensure that our key fobs are in good working condition for the long run.

One of the most common problems is a low or dead battery. This can cause your fob to stop working or operate intermittently. If this happens, try replacing the battery with a new one.

If this doesn't solve the issue, you can use the flathead screwdriver that is standard to wedge the fob's casing made of plastic open. Be careful not to harm any internal components or scratch the plastic. When the battery is open, carefully take off the old battery and replace it with a brand new one.

Once the new battery is installed, close and unlock the doors with the mechanical key (every kia soul replacement key cost fob has an emergency mechanical key that will fit into the slot). Test the key fob to confirm it's functioning correctly. If the fob still not working, contact an expert locksmith or dealer to help resolve the issue. To avoid lockouts in the future, ensure that you have an emergency key that will work in all of the door and trunk cylinders.