10 Myths Your Boss Has Regarding Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the frames that were previously in use very easily. However If you have double glazed window repairs-pane windows that are held in place by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this situation, you will need to source some plastic spacers that help the new pane to fit properly into the frame of the window.

If you're planning attempt to remove the glass panes yourself it is crucial to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor and could be trampled under.

It's a great idea to tape the gap once the glass is removed. This will keep drafts and water from getting into your property until a professional arrives to repair the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

upvc window repairs near me is durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they are susceptible to a range of problems including sliding. A window that is sagging can cause problems with light, draughts and even security. It's crucial to act when you notice your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window which is sliding. To accomplish this, you'll need open the window so that you can get to the frame. Then, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you are happy with the fit of the window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges, you might have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loosen. It is important to replace your seal as quickly as you can to keep your upvc window Repair window watertight and draughtproof.

uPVC handles may also loosen. The majority of the time, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close the window and then perform a test fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

It is essential to take action if awake each day to discover mouldy walls and floors that are wet. Water leaks from windows are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Based on the severity of the issue the old caulking may need to be removed before a new layer of caulk can be applied. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and can reduce your energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely that the problem is related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or it blows open with a breeze. Any competent DIYer can replace hinges in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It is very easy to change the hinges on a window however it is easier if someone helps you to hold the frame.

Make sure that the uPVC hinges are open and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused due to opening the window in the wrong way or a faulty installation at the factory. Sending us a picture through our website can often solve the issue. We are always happy to give advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant on the hinges is a great way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. This should be done at least once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also become disaligned as a result of wear, creating an opening between the frame and sash. These can be easily repaired by giving them thorough clean, however if they are beyond repair it may be necessary to have them re-aligned or replaced. In addition, the interlock could also become unbalanced. This is located on the hinge's side, and could require to be cleaned. In some instances it is possible to replace these.

These seals can wear down or be damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and lessen the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be placed over your window sill. They can help block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide a great level of insulation and security for your home. It is crucial to keep in mind that all windows eventually get worn out and it may be more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your Upvc windows, it is best to seek professional assistance immediately.